10.0mm A2 Stainless Torx Double Countersunk Screws available in extra long lengths.
| SKU | Material | Box Quantity | Size (Diameter x Length) | Thread | Torx |
|---|---|---|---|---|---|
| 9047 | A2 304 | 10 | 10.0mm x 60mm | Part Thread (50mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 60mm | Full Thread | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 70mm | Part Thread (55mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 80mm | Part Thread (55mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 90mm | Part Thread (55mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 100mm | Part Thread (55mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 110mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 120mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 130mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 140mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 150mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 160mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 170mm | Part Thread (80mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 180mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 190mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 200mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 220mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 240mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 260mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 280mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 300mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 320mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 340mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 360mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 375mm | Part Thread (105mm) | TX40 |
| 9047 | A2 304 | 10 | 10.0mm x 400mm | Part Thread (105mm) | TX40 |
A4 available for marine environments. Double countersunk Heads For extra strength and sharp points to eliminate pre drilling even in most hardwoods. Ribs under head on 6mm x 140mm and above, on 8mm and 10mm Diameter. Reinforced double countersunk Head European technical approval ETA 11/0283 (Diameter 3,0 and 3,5 not component in the approval)
| 3.0mm Diameter | 3.5mm Diameter | 4.0mm Diameter | 4.5mm Diameter |
| 5.0mm Diameter | 6.0mm Diameter | 8.0mm Diameter | 10.0mm Diameter |
Stainless Steel A4 316 marine grade wood screws with a double countersunk reinforced head. Available with plain head and sharp point or Ribbed head and cutting tip.
Find more on 10.0mm A2 Stainless Torx Double countersunk wood screws at Swiftfix.