260mm Blue Power Screws

7.4mm x 260mm Concrete blue power screws Countersunk head with a special coating.

Blue-Power façade mounting system 

For fastening timber substructures to concrete or brickwork

The Blue-Power façade mounting system is a quick and easy solution wherever timber substructures are to be fastened, with spacing, to concrete or brickwork. 

The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.

Blue Power Concrete Screws
7.4mm x 260mm Concrete Screw

Areas of use 

Outdoors: rear-ventilated curtain façade with façade insulation

Indoors: e.g. suspended ceilings, wall panelling, etc.

Advantages 

  • Plug-free installation
  • Short assembly times
  • Can be used with standard battery-driven electric tools

Easy installation

  1. Pilot-drill tiling battens to 6.5 mm
  2. Pilot-drill subsurface
  3. Insert Blue-Power system screw through tiling battens and into subsurface
Art. no. SizeDriveBox QtyEAN Number
110390 7,4 x 180 mm TX40100 4251314700438
110391 7,4 x 200 mm TX40 100 4251314700445
110392 7,4 x 220 mm TX40 100 4251314700452
110393 7,4 x 240 mm TX40 100 4251314700469
110394 7,4 x 260 mm TX40 100 425131470047
110395 7,4 x 280 mm TX40 100 4251314700483
110396 7,4 x 300 mm TX40 100 4251314700490
110397 7,4 x 320 mm TX40 100 4251314700506
110398 7,4 x 340 mm TX40 100 4251314700513
110399 7,4 x 360 mm TX40 100 4251314700520
110400 7,4 x 380 mm TX40 100 4251314700537
110401 7,4 x 400 mm TX40 100 4251314700544
110404 7,4 x 450 mm TX40 100 4064827055328
110407 7,4 x 500 mm TX40 100 4064827055335
%d bloggers like this: