Extra long fully threaded A4 stainless steel screws in 10mm diameter.
Eurotec Konstrux screws in A4 grade for the highest level of corrosion resistance in a high strength screw.
Features and benefits
- High extraction resistance
- Strong joints
- AG sharp tip
- Marine grade A4 stainless steel
- Reduced screwing torque
- Greater extraction resistance
- Fully threaded
A multiple use screw for all timber frame construction joints
- Applications in timber engineering and carpentry, timber-frame construction, hall construction, construction of timber elements,renovation of ceilings, etc.
- Maximum load transmission Konstrux screws A4 fully threaded maximise a joint‘s load-bearing capacity with a high thread-extraction resistance in both components. If partially threaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
- Time saving A time- and cost-saving alternative to traditional connections or timber joints such as joist hangers, joist supports, etc.
- Timber has a low transverse compressive and shear strength. KonstruX fully threaded screws are inserted into the timber for reinforcement. The KonstruX “takes on” a large proportion of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity of floor joists and reduces bending. Here, Konstrux screws A4 fully threaded join the components together in a displacement-resistant manner.
- Hidden connections, high fire-resistance, no thermal bridges
- No pilot-drilling required in accordance with approval/ETA From screw lengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length is advisable to guide the screw in the right direction (no screw wandering).
- The required edge and centre distances can be minimised for screws that are only exposed to tension.
Extra long fully threaded A4 please contact us for pricing if not available to buy online.
Our range of Konstrux screws are also available at Swiftfix Distributors Ltd.