Home

10.0 x 160mm KonstruX Countersunk Construction Screws A4 st.st Box of 25

SKU EUR-905750
£0.00
Out of stock
1
Product Details

KonstruX fully threaded screw

KonstruX fully threaded screw

  • High extraction resistance
  • Strong joints

Benefits of NEW drill point

  • Reduced screwing torque
  • Greater extraction resistance

One system for all timber-frameconstruction joints

  • Applications in timber engineering and carpentry, timber-frameconstruction, hall construction, construction of timber elements,renovation of ceilings, etc.
  • Maximum load transmissionKonstruX fully threaded screws maximise a joint‘s load-bearing capacitywith a high thread-extraction resistance in both components. If partiallythreaded screws are used, the joint‘s load-bearing capacity is limited bythe considerably lower head pull-through resistance in the attached part.
  • Time savingA time- and cost-saving alternative to traditional connections or timberjoints such as joist hangers, joist supports, etc.
  • Timber has a low transverse compressive and shear strength.KonstruX fully threaded screws are inserted into the timber forreinforcement. The KonstruX “takes on” a large proportion of the forces.
  • Doubling up of joists, for example, increases the load-bearing capacity offloor joists and reduces bending. Here, KonstruX fully threaded screwsjoin the components together in a displacement-resistant manner.
  • Hidden connections, high fire-resistance, no thermal bridges
  • No pilot-drilling required in accordance with approval/ETA From screwlengths ≥ 245 mm, however, pilot-drilling to 1/3 of the screw length isadvisable to guide the screw in the right direction (no screw wandering).
  • The required edge and centre distances can be minimised for screws thatare only exposed to tension.
Save this product for later