Home » Products » Timber Accessories » Timber Frame Ties

Timber Frame Ties

TFT

Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height.

Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter.

Timber-Frame-Ties

•Grade 1.4301 austenitic stainless steel to EN 10088-2.
•Complies with a DD140 Type 6 tie.
•Tested by Ceram Research.
•Meets with the appropriate parts of NHBC standards.
•Complete with annular ring shank nails.

Part  TFT50   Timber Frame Tie     Tie Width  19mm     Tie Length  130mm      Cavity Width   50mm to 74mm

Part  TFT75   Timber Frame Tie     Tie Width  19mm     Tie Length  155mm      Cavity Width   75mm to 99mm

Part  TFT100   Timber Frame Tie     Tie Width  19mm     Tie Length  180mm      Cavity Width   100mm to 120mm

 

•Grade 1.4301 austenitic stainless steel to EN 10088-2.
•Complies with a DD140 Type 6 tie.
•Tested by Ceram Research.
•Meets with the appropriate parts of NHBC standards.
•Complete with annular ring shank nails.

•Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre.

<br

Leave a Reply

%d bloggers like this: