Angle Bracket Screws by Eurotec are made of hardened carbon steel, blue galvanised and are specially designed for steel sheet-wood connections. The splitting effect in wood is reduced by the geometry of the screw tip. In addition, the screw is characterised by the smooth shank under the head, which enables load transfer during shearing. The thread on these fixings allows for the load transfer under tension (and shearing). These fixings are intended for fixing steel sheets and three-dimensional nailing plates (as joist hangers etc.) to timber. When using, the bore holes have to have a diameter of 5mm.
Angle Bracket Screws Available:
These screws are applicable in service classes 1 and 2 to DIN EN 1995 – Eurocode 5. ETA-11/0024.
Advantages
- Faster and simpler screwing-in.
- Significantly lower splitting effect.
- A good resistance to mechanical loading.
- Contains no chromium(VI) oxide.
If you would like more information on these products, then please contact the Swiftfix team.