Blue Power Screws

Blue Power Screws are a façade mounting system for fastening timber substructures to concrete or brickwork. They are a quick and easy solution when fastening timber substructures with spacing, to concrete or brickwork. These system screws absorb the effects of both the tensile and transverse forces. And when installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should also have a cross section of at least 30 x 50mm. For outdoor use, they can be used for rear-ventilated curtain façades with façade insulation. Whereas for indoor use, they are ideal for suspended ceilings, wall panelling and more.

Blue Power Screws

Blue Power Screws Available:

7.4mm x 180mm7.4mm x 200mm7.4mm x 220mm7.4mm x 240mm
7.4mm x 260mm7.4mm x 280mm7.4mm x 300mm7.4mm x 320mm
7.4mm x 340mm7.4mm x 360mm7.4mm x 380mm7.5mm x 400mm
7.4mm x 450mm7.4mm x 500mm

Product Data Sheet


  • Plug-free installation.
  • Significantly short assembly times.
  • Can be also be used with standard battery-driven electric tools.

Easy installation

  1. Pilot-drill tiling battens to 6.5 mm.
  2. Pilot-drill subsurface.
  3. Insert Blue-Power system screw through tiling battens and into subsurface.

If you would like more information on these products, then please contact the Swiftfix team.

%d bloggers like this: