300mm Blue Power Screws

7.4mm x 300mm Blue Power Screws Countersunk head with a special coating.

300mm Blue-Power screws façade mounting system 

For fastening timber substructures to concrete or brickwork

The Blue-Power façade mounting system is a quick and easy solution wherever façades or timber batons, ply boards need to be fixed to concrete or brickwork. 

General Information

The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.

300mm concrete screws

Areas of use:

Outdoors: rear-ventilated curtain façade with façade insulation

Indoors: such as suspended ceilings, wall panelling, etc.

Advantages:

• Plug-free installation
• Short assembly times
• Can be used with standard battery-driven electric tools (countersunk head)

Easy installation:

1. Pilot-drill tiling battens to 6.5 mm
2. Pilot-drill subsurface
3. Insert Blue-Power system screw through tiling battens and into subsurface

Art. no.	Size	Drive	Box Qty	EAN Number
110390	7,4 x 180 mm	TX40	100	4251314700438
110391	7,4 x 200 mm	TX40	100	4251314700445
110392	7,4 x 220 mm	TX40	100	4251314700452
110393	7,4 x 240 mm	TX40	100	4251314700469
110394	7,4 x 260 mm	TX40	100	425131470047
110395	7,4 x 280 mm	TX40	100	4251314700483
110396	7,4 x 300 mm	TX40	100	4251314700490
110397	7,4 x 320 mm	TX40	100	4251314700506
110398	7,4 x 340 mm	TX40	100	4251314700513
110399	7,4 x 360 mm	TX40	100	4251314700520
110400	7,4 x 380 mm	TX40	100	4251314700537
110401	7,4 x 400 mm	TX40	100	4251314700544
110404	7,4 x 450 mm	TX40	100	4064827055328
110407	7,4 x 500 mm	TX40	100	4064827055335

For drill bits long enough to install the blue power screws please visit the online store.