Small headed decking and facade screws. Reduced head terrace screws with a torx TX drive.

4.5mm diameter (measured from the outside of the threads.

T-Drive recess head for optimal load transfer during installation.

Cutting Point to reduce to need for pre-drilling.

A minimum screw-in depth of 4 x the diameter must be ensured. A screw-in depth of 8 x the diameter should be achieved depending on the wood.

Suitable for Softwoods and hardwoods without high levels of Tanin such as green oak and red cedar.

Ideal for woods such as Yellow Balau, Siberian Larch, Douglas Fir, Massaranduba, Ipe, Pine and all plastic and composite products.

For woods with high levels of Tanin and for coastal areas we would recommend A4 316 stainless steel. A2 may also be suitable but testing is recommended.