Countersunk head, special coating

Blue-Power façade mounting system

For fastening timber substructures to concrete or brickwork

The Blue-Power façade mounting system is a quick and easy solution wherever timber substructures are to be fastened, with spacing, to concrete or brickwork.

The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.

Can be used for; Outdoors: rear-ventilated curtain façade with façade insulation. Indoors: e.g. suspended ceilings, wall panelling, etc.

Advantages Plug-free installation Short assembly times Can be used with standard battery-driven electric tools

Easy installation Pilot-drill tiling battens to 6.5 mm Pilot-drill subsurface Insert Blue-Power system screw through tiling battens and into subsurface