The milling and assembling jig for simple, fast and safe installation of the Atlas wood connector.

Contents:

• 1 x milling and assembly jigs in various sizes  HFS200

• 1 x carbide groove-milling cutters in various sizes HFF200

• Screw set for fastening the milling and assembly jig

* The milling and assembly jig for easy, fast and secure assembly of the Atlas wood connector

Simply set the stopper for the milling and assembling jig to the required size of the Atlas wood connector, put the milling and assembling jig in place, fix it and cut out the pocket with the corresponding groove miller.

Assembly

• Simply set the stopper for the milling and assembling jig to the required size of the Atlas wood connector, put the milling and assembling jig in place, fix it and cut out the pocket with the corresponding groove miller.

• The Atlas is then set into the milled recess and fastened with the supplied system screws. The milling and assembling jig is then placed in the same setting on the component that is to be connected and the identical second part of the Atlas wood connector is screwed in place. Pre-assembly is now complete and the component to be connected is suspended in place.

• In conclusion, the fixing screw is inserted into the Atlas. In this way the Atlas wood connector is pulled together, if necessary, and the position security of the hook connector is guaranteed. THAT‘S IT! The installation can therefore be both visible (for broad root with chamfer connections) and invisible (milled recess).

The above assembly example shows the invisible installation. With visible installation, there is no need for milling and the milling and assembling jig is only used as an assembling jig.