Blue Power Insulation Masonry Screws
BLUE POWER
Blue-Power façade mounting system
For fastening timber substructures to concrete or brickwork
The Blue-Power façade mounting system is a quick and easy solution wherever timber substructures are to be fastened, with spacing, to concrete or brickwork.
The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.
Areas of use
Outdoors: rear-ventilated curtain façade with façade insulation
Indoors: e.g. suspended ceilings, wall panelling, etc.
Advantages
- Plug-free installation
- Short assembly times
- Can be used with standard battery-driven electric tools
Easy installation
- Pilot-drill tiling battens to 6.5 mm
- Pilot-drill subsurface
- Insert Blue-Power system screw through tiling battens and into subsurface
nnnn