Countersunk head, special coating

Blue-Power façade mounting system
For fastening timber substructures to concrete or brickwork
The Blue-Power façade mounting system is a quick and easy solution wherever timber substructures are to be fastened, with spacing, to concrete or brickwork.
The Blue-Power system screws absorb the effects of both the tensile and transverse forces. When the system is installed on façade insulation, the insulation absorbs a proportion of the transverse forces. The insulation product must therefore have a compressive strength of at least 50 kPa at 10% compression. The C24 tiling battens should have a cross section of at least 30 x 50 mm.
Areas of use
Outdoors: rear-ventilated curtain façade with façade insulation
Indoors: e.g. suspended ceilings, wall panelling, etc.
Advantages

• Plug-free installation
• Short assembly times
• Can be used with standard battery-driven electric tools

Easy installation

1. Pilot-drill tiling battens to 6.5 mm
2. Pilot-drill subsurface
3. Insert Blue-Power system screw through tiling battens and into subsurface