Thin Kerf Gold TCT Wood Blades
Thin Kerf Gold TCT Wood Blades
Professional TCT Thin Kerf blades designed for cordless machines to reduce power drain
- Quality blades featuring an Alternate Top Bevel (ATB) tooth configuration for the professional tradesman
- Unique ‘Gold’ coating creates ultra low friction and wear resistance
- Reamed bore ensures precise fit to spindle
- Front bevel tooth form for a superior quality of cut
- Suitable for use on rip saws
- Anti-kickback for smooth action & safety during use
- Body hardened and tempered to maintain trueness
- Range includes blades from 120mm to 190mm diameter for coarse cutting through to fine cutting
- Suitable for cutting softwood, hardwood, particle board, MDF, hardboard and plywood
- Reducing rings available
TOOTH TYPE KEY:
ATB Tooth: Suitable for most applications including rip saws and table saws.
ATB Neg Tooth: Suitable for use on mitre saws and chop saws. Minimises snatching and pick up of material.
ATB 30 Degree Tooth: Suitable for laminate material to reduce damage to the surface. Fast cut.
TCG Tooth: Suitable for materials such as aluminium, plastic, wood laminates and other manmade materials. Leaves a chip-free finish due to its bevelled corner tooth which cuts first followed by a flat top tooth.
CIRCULAR SAW BLADE CUT TYPE:
WOOD - COARSE FINISH
These blades have between 16 and 20 teeth for smaller lades and 28 teeth for blades with a diameter greater than 190mm. Suitable for ripping through woods such as softwood, hardwood and plywood.
WOOD - MEDIUM FINISH
These blades have between 20 and 28 teeth for smaller blades and 40 teeth for blades with a diameter greater than 190mm. Suitable for cutting through woods such as softwood, hardwood and plywood.
WOOD - FINE FINISH
These blades have between 40 and 80 teeth; 40 teeth for blades with a diameter of up to 190mm, 60 teeth for 210-260mm diameter and 80 teeth for blades with a larger diameter. Suitable for cutting through woods such as softwood, hardwood, particle board, MDF, single-sided wood laminates, hardboard and plywood.
WOOD - EXTRA FINE FINISH
Theses blades have between 60 and 100 teeth; 60 teeth for blades with a diameter of up to 190mm, 80 teeth for 210-260mm diameter and 100 teeth for blades with a larger diameter. Use for an extra fine finish cut through woods such as softwood, hardwood, particle wood, MDF, wood laminates, hardboard and plywood.
ALU/PLASTIC/LAMINATES - FINE FINISH
These blades have Triple Chip Tooth configurations and have between 40 and 100 teeth. Suitable for cutting non-ferrous metals including aluminium, plastic and wood laminates.
nnnn