6.0 x 90mm Paneltwistec countersunk head wood screws. Manufactured with an extra long washer construction wood screws. Therefore, these Paneltwistec’s are a high strength premium wood. Torx TX30 Drive Eurotec Part 945633.
Premium high strength wood screws available in extra long lengths.
CE Approved ETA- 11/0024 Wood Screws German made.
6.0 x 90mm Paneltwistec countersunk wood screws AG Blue+ High quality construction timber wood screws are suitable for warm roof construction, SIP Panel construction. Special AG Tip – The special geometry of the AG screw tip considerably reduces the screwing torque, so the screw is easier to tighten. This delivers a reduced splitting effect during screwing compared to conventional wood screw tips.
These wood screws are available in Countersunk Torx Drive and Flange Head or washer head Torx Drive. The 6.0mm screws are also available up to 300mm long with the 8.0mm up to 600mm and the 10.0mm up to 400mm long. Also available in 12mm diameter in Yellow coated.
Corrosion Protection, Blue+ on these Paneltwistec screws, is an innovative coating system with greater corrosion resistance than standard electro-galvanised surfaces.
In the blue+ system, a sealant is applied to a galvanised surface and reacts with it. In this way, any weak points in the wood screws galvanisation are safely sealed and protected. The coating is free of chromium(VI) oxide, therefore, are not classified as being hazardous to the environment. Surfaces treated with blue+ on Paneltwistec screws have excellent resistance to mechanical stress.
Find more information on the paneltwistec 90mm countersunk head screws and other wood screws here on Swiftfix.