8.0mm KonstruX Timber Construction Screws Fully Threaded with a Cylinder Head and Zinc Plated. These screws boast a high pull-out resistance and help maintain a strong connection. The advantage of its new drill tip ensures a reduced screw in torque.
KonstruX fully threaded screws ETA 11/0024 approved.
8.0mm KonstruX Timber Construction Screws
| Size (Diameter x Length) | UPC |
|---|---|
| 8.0mm x 155mm | 4251314705051 |
| 8.0mm x 195mm | 4251314705068 |
| 8.0mm x 220mm | 4251314705075 |
| 8.0mm x 245mm | 4251314705082 |
| 8.0mm x 270mm | 4251314720955 |
| 8.0mm x 295mm | 4251314705099 |
| 8.0mm x 330mm | 4251314705105 |
| 8.0mm x 375mm | 4251314705112 |
| 8.0mm x 400mm | 4251314705129 |
| 8.0mm x 430mm | 4251314705365 |
| 8.0mm x 480mm | 4251314705372 |
One system for all load-bearing connections in timber construction
- For application especially in timber engineering, carpentry, timber frame construction, hall construction, timber element construction, renovation of floor ceilings, etc.
- Also ensures the highest power transmission.
- The KonstruX fully-threaded screws maximise the load-bearing capacity of a connection due to the high threaded pull-out resistance in both components. When using partial threaded screws, the significantly lower head pull-through resistance in the attachment part limits the load-bearing capacity of the connection.
- They are a time and cost-saving alternative to traditional connections or timber joints such as joist hangers, joist supports, etc.
- Additionally, wood has a low transverse pressure and transverse tensile strength. Hence for reinforcement, KonstruX full threaded screws are placed in the wood, to “take over” a large part of the forces.
- Doubling up of joists, for example, increases the load-bearing capacity of floor joists and reduces bending. KonstruX fully threaded screws subsequently join the components together in a displacement-resistant manner.
- Additionally they have invisible connections, a high fire resistance, and no thermal bridges.
- There is no pre-drilling required after approval/ETA. From screw lengths ≥ 245 mm, however, a trend-setting pre-drilling to 1/3 of the screw length can be recommended (no running of the screw).
- Further in the case of screws that are used exclusively on tension, the required edge and axle distances may be minimised.
https://timberfixings.com/online-shop/Atlas-Connectors-c30967020
KonstruX screws in 6.5mm and 10mm and can be found here.
For more information on these products, please contact our Swiftfix team.