Metal TCT Saw Blades
Metal TCT Saw Blades
Quality TCT blades featuring a Triple Chip Ground (TCG) tooth configuration for fast and clean cuts in various metal sections
- Anti-kick back tooth for smooth action and increased safety during use
- Reamed bore ensures precise fit to spindle
- Hardened steel body with lock embedded tungsten tip
- Range includes blades from 136mm to 355mm diameter with 32 teeth to 72 teeth
- Suitable for cutting construction steel, metal tube, U-steel, H-profiles and sheet metal cased insulation panels
TOOTH TYPE KEY:
ATB Tooth: Suitable for most applications including rip saws and table saws.
ATB Neg Tooth: Suitable for use on mitre saws and chop saws. Minimises snatching and pick up of material.
ATB 30 Degree Tooth: Suitable for laminate material to reduce damage to the surface. Fast cut.
TCG Tooth: Suitable for materials such as aluminium, plastic, wood laminates and other manmade materials. Leaves a chip-free finish due to its bevelled corner tooth which cuts first followed by a flat top tooth.
CIRCULAR SAW BLADE CUT TYPE:
WOOD - COARSE FINISH
These blades have between 16 and 20 teeth for smaller lades and 28 teeth for blades with a diameter greater than 190mm. Suitable for ripping through woods such as softwood, hardwood and plywood.
WOOD - MEDIUM FINISH
These blades have between 20 and 28 teeth for smaller blades and 40 teeth for blades with a diameter greater than 190mm. Suitable for cutting through woods such as softwood, hardwood and plywood.
WOOD - FINE FINISH
These blades have between 40 and 80 teeth; 40 teeth for blades with a diameter of up to 190mm, 60 teeth for 210-260mm diameter and 80 teeth for blades with a larger diameter. Suitable for cutting through woods such as softwood, hardwood, particle board, MDF, single-sided wood laminates, hardboard and plywood.
WOOD - EXTRA FINE FINISH
Theses blades have between 60 and 100 teeth; 60 teeth for blades with a diameter of up to 190mm, 80 teeth for 210-260mm diameter and 100 teeth for blades with a larger diameter. Use for an extra fine finish cut through woods such as softwood, hardwood, particle wood, MDF, wood laminates, hardboard and plywood.
ALU/PLASTIC/LAMINATES - FINE FINISH
These blades have Triple Chip Tooth configurations and have between 40 and 100 teeth. Suitable for cutting non-ferrous metals including aluminium, plastic and wood laminates.
BLADE CUTTING SPEED
BLADE | FASTER | - | SLOWER |
Diameter |
Thin Sections Up to
1.6mm (20-45m/sec) |
Medium Sections
2-4mm (20-25 m/sec) |
Thick Sections
5-12mm (20-30 m/sec) |
136mm | 2800-6300 rpm | 2800-4900 rpm | 2800-4200 rpm |
165mm | 2400-5300 rpm | 2400-4200 rpm | 2400-3600 rpm |
180mm | 2100-4800 rpm | 2100-3700 rpm | 2100-3200 rpm |
185mm | 2100-4800 rpm | 2100-3700 rpm | 2100-3200 rpm |
230mm | 1800-4100 rpm | 1800-3200 rpm | 1800-2700 rpm |
255mm | 1500-3600 rpm | 1500-3100 rpm | 1500-2100 rpm |
305mm | 1250-2800 rpm | 1250-2200 rpm | 1250-1900 rpm |
355mm | 1100-2400 rpm | 1100-1900 rpm | 1100-1600 rpm |
Contact our Swiftfix team for further information and enquiries of our online shop you may have.
Great to see these now being sold in the uk
I am looking at buying one of your augers but my country, Australia, does not show up on your list. Is it possible for me to buy one or do you not ship to Australia
We do ship to Australia and most countries. The carriage will have to be worked out for each requirement.
Hi im trying to get a order to Australia but i cant enter Australia in the order form .
Hi Allan
We do ship to Australia but need to work out carriage for each requirement.
Can you please email me and i will arrange a quote – sales@swiftfix.co.uk